E6000 console battery replacement

  1. Place the console face down
  2. Remove 4 screws holding back cover in place, and remove cover case open
  3. Remove screw from power cable bracket power cable bracket
  4. Remove 2 screws from ribbon cable bracket ribbon cable bracket
  5. Unplug ribbon cable ribbon cable
  6. Remove 4 long screws from power transformer transformer screws
  7. Remove 2 screws from circuit board PCB screws
  8. Remove 4 screws from corners of circuit board 20160510_114946 20160510_114952
  9. Remove circuit board from case 20160510_115054 20160510_115352
  10. De-solder battery 20160510_115228 20160510_120105
  11. Prepare new battery for soldering (in this case, place a blob of solder on each lead) 20160510_115545 20160510_115609
  12. Position new battery with negative lead to pad with large copper track connection 20160510_115618
  13. Solder new battery in place (in this case, “sweat” the previously-placed blob) 20160510_115646 20160510_115706
  14. Re-assemble console
  15. Power up console – note display flashes “MEMO”
  16. Select language

Leave a Reply

Your email address will not be published. Required fields are marked *